Showing posts with label Electrical Engineering. Show all posts
Showing posts with label Electrical Engineering. Show all posts

Thursday, 13 April 2017

D.C Motors Multiple Choice Questions and Answers

D.C Motors Multiple Choice Questions and Answers Preparation for Competition exams pdf

1.    No-load speed of which of the following motor will be highest ?
(a)     Shunt motor  
(b)     Series motor
(c)    Cumulative compound motor
(d)    Differentiate compound motor
Ans: b

2.    The direction of rotation of a D.C. series motor can be changed by
(a)     interchanging supply terminals
(b)     interchanging field terminals
(c)    either of (a) and (b) above
(d)    None of the above
Ans: b

3. Which of the following application requires high starting torque ?
(a) Lathe machine
(b) Centrifugal pump
(c) Locomotive
(d) Air blower
Ans: c

4.    If a D.C. motor is to be selected for conveyors, which rriotor would be preferred ?
(a)     Series motor
(b)     Shunt motor
(c)    Differentially compound motor
(d)    Cumulative compound motor
Ans: a

5.    Which D.C. motor will be preferred for machine tools ?
(a)    Series motor
(b)    Shunt motor
(c)    Cumulative compound motor
(d)    Differential compound motor
Ans: b

6.    Differentially compound D.C. motors can find applications requiring
(a)    high starting torque
(b)    low starting torque
(c)     variable speed
(d)    frequent on-off cycles
Ans: b

7.    Which D.C. motor is preferred for elevators ?
(a)    Shunt motor
(b)    Series motor
(c)    Differential compound motor
(d)    Cumulative compound motor
Ans: d

8.    According to Fleming's left-hand rule, when the forefinger points in the direction of the field or flux, the middle finger will point in the direction of
(a)     current in the conductor aovtaat of conductor
(c)    resultant force on conductor
(d)    none of the above
Ans: a

9.    If the field of a D.C. shunt motor gets opened while motor is running
(a) the speed of motor will be reduced %
(b) the armature current will reduce
(c)  the motor will attain dangerously high speed 1  
(d) the motor will continue to nuvat constant speed
Ans: c

10.    Starters are used with D.C. motors because
(a)    these motors have high starting torque
(b)    these motors are not self-starting
(c)    back e.m.f. of these motors is zero initially
(d)    to restrict armature current as there is no back e.m.f. while starting
Ans: d

Saturday, 18 March 2017

Electrical Engineering MCQs With Answers (Question No 21-30)

Practice Test: Question Answer (Question No 21-30)


1. Which of the following parameter will be more for 16 gauge copper wire in comparison to 14 gauge copper wire?
    (A) Cost
    (B) Strength
    (C) Resistance
    (D) Weight

2. The length of wire having resistance of 1 ohm/m in a heater rated at 1000 W and 250 V will be
    (A) 250 m
    (B) 125 m
    (C) 62.5 m
    (D) 500 m

3. Power dissipated in a pure capacitor is
    (A) Minimum
    (B) Maximum
    (C) Infinite
    (D) Zero

4. The size of the feeder is determined primarily by
    (A) The current it is required to carry
    (B) The percentage variation of voltage in the feeder
    (C) The voltage across the feeder
    (D) The distance over which the transmission is made

5. Non-conductors whose polarization is caused by an electric field are known as
    (A) Dielectric
    (B) Super-conductors
    (C) Semi-conductors
    (D) Insulators

6. If the diameter of a conductor is double, then its resistance will be reduced to
    (A) Half
    (B) One-fourth
    (C) One-eight
    (D) One-sixteenth

7. One of difficulties encountered with super-conductors is
    (A) The materials become highly magnetic
    (B) Strength is reduced
    (C) Resistance is increased
    (D) Maintenance of low temperature

8. The inductance of a coil can be increased by
    (A) Decreasing number of turns
    (B) Increasing core length
    (C) Using core material of high relative permeability
    (D) All of the above

9. The resistance of a lamp rated at 240 V and 60 watts equal to
    (A) 60 ohms
    (B) 120 ohms
    (C) 240 ohms
    (D) 480 ohms

10. Two resistances of 100 ohms and 0 ohm are connected in parallel. The overall resistance will be
    (A) 100 ohms
    (B) 50 ohms
    (C) Zero ohm
    (D) Any one of the above

Show and hide multiple DIV using JavaScript View All Answers


Multiple Choice Questions with Answers on Thyristors (SCR)

Multiple Choice Questions Answers on Thyristors (SCR)

1. An SCR is a ...... triggered device
(1) Voltage
(2) Current
(3) Voltage as well as current
(4) None of the above


2. In an SCR circuit, the supply voltage is generally ......... that of breakover voltage
(1) Equal to
(2) Less than
(3) Greater than
(4) None of the above


3. When an SCR is turned on, the voltage across it is about ..........
(1) zero
(2) 10 V
(3) 0.1 V
(4) 1V


4. An SCR is turned off when
(1) Anode current is reduced to zero
(2) Gate voltage is reduced to zero
(3) Gate is reverse biased
(4) None of the above


5. In an SCR circuit, the angle of conduction can be changed by
(1) Changing anode voltage
(2) Changing gate voltage
(3) Reverse biasing the gate
(4) None of the above


6. If firing angle is increased, then the output of an SCR
(1) Remains the same
(2) Is increased
(3) Is decreased
(4) None of the above


7. If gate current is increased, then anode-cathode voltage at which SCR turns ON
(1) is decreased
(2) is increased
(3) remains the same
(4) none of the above


8. An SCR has ........... PN junctions.
(1) Two
(2) Three
(3) Four
(4) None of the above


9. An SCR has ........ semiconductor layers.
(1) Two
(2) Three
(3) Four
(4) None of the above


10. In AC supply,  an SCR can exercise control over
(1) Positive half-cycles only
(2) Negative half-cycles only
(3) Both positive and negative half-cycles
(4) Positive or negative half-cycles


11. AC power in a load can be controlled  by connecting
(1) Two SCRs in series
(2) Two SCRs in parallel
(3) Two SCRs in parallel opposition
(4) None of the above


12. When SCR starts conducting, which loses all control?
(1) Cathode
(2) Gate
(3) Anode
(4) None of the above


Thursday, 23 February 2017

Objective Questions or MCQs on Basic Electrical 01

Basic Electrical
01) If 1 A current flows in a circuit, the number of electrons flowing through this circuit is
0.625 × 1019
1.6 × 1019
1.6 × 10 - 19
0.625 × 10 - 19

02) The resistivity of the conductor depends on
area of the conductor.
length of the conductor.
type of material.
none of these.

03) The resistance of a conductor of diameter d and length l is R Ω. If the diameter of the conductor is halved and its length is doubled, the resistance will be
R Ω
2R Ω
4R Ω
8R Ω

04) How many coulombs of charge flow through a circuit carrying a current of 10 A in 1 minute?
10
60
600
1200

05) ² The unit of resistivity is
Ω.
Ω - metre.
Ω / metre.
Ω / m².

06) Instantaneous power in inductor is proportional to the
product of the instantaneous current and rate of change of current.
square of instantaneous current.
square of the rate of change of current.
temperature of the inductor.

07) The voltage induced in an inductor is represented as,
product of its inductance and current through it.
ratio of its inductance to current through it.
ratio of current through it to its inductance.
product of its inductance and rate of change of current through it.

08) Magnetic flux has the unit of
Newton
Ampere turn
Weber
Tesla

09) If P is the power of a star connected system then what will be power of an equivalent delta connected system?
P
3P
P/3
None of the above

10) Which of the followings is/are active element?
Voltage source
Current source
Both
None of these.

Answers :
  1. A
  2. C
  3. D
  4. C
  5. B
  6. A
  7. D
  8. C
  9. A
  10. C

Tuesday, 17 January 2017

100 TOP Current Electricity - Electrical Engineering Multiple Choice Questions and Answers

Current Electricity
An electric current is a flow of electric charge. In electric circuits this charge is often carried by moving electrons in a wire. It can also be carried by ions in an electrolyte, or by both ions and electrons such as in a plasma.

1. The S.I. unit of power is
(a) Henry
(b) coulomb
(c) watt
(d) watt-hour
Ans: c

2. Electric pressure is also called
(a) resistance
(b) power
(c) voltage
(d) energy
Ans: c

3. When a voltage of one volt is applied, a circuit allows one micro ampere current to flow through it. The conductance of the circuit is
(a) 1 n-mho
(b) 106 mho
(c) 1 milli-mho
(d) none of the above
Ans: a

4. Out of the following which is not a poor conductor ?
(a) Cast iron
(b) Copper
(c) Carbon
(d) Tungsten
Ans: b

5. Out of the following which is an insulating material ?
(a) Copper
(b) Gold
(c) Silver
(d) Paper
Ans: d

6. The property of a conductor due to which it passes current is called
(a) resistance
(b) reluctance
(c) conductance  
(d) inductance
Ans: c

7. Conductance is reciprocal of
(a) resistance
(b) inductance
(c) reluctance
(d) capacitance
Ans: a

8. The resistance of a conductor varies inversely as
(a) length
(6) area of cross-section
(c) temperature  
(d) resistivity
Ans: b

9. With rise in temperature the resistance of pure metals
(a) increases
(b) decreases
(c) first increases and then decreases
(d) remains constant
Ans: a

10. Which of the following can have negative temperature coefficient ?
(a) Compounds of silver
(6) Liquid metals
(c) Metallic alloys
(d) Electrolytes
Ans: d

11. The resistance of a copper wire 200 m long is 21 Q. If its thickness (diameter) is 0.44 mm, its specific resistance is around
(a) 1.2 x 10~8 Q-m
(b) 1.4 x 10~8 Q-m
(c) 1.6 x 10""8 Q-m
(d) 1.8 x 10"8 Q-m
Ans: c

12. Three resistances of 10 ohms, 15 ohms and 30 ohms are connected in parallel.
The total resistance of the combination is
(a) 5 ohms
(b) 10 ohms
(c) 15 ohms
(d) 55 ohms
Ans:

13. An instrument which detects electric current is known as
(a) voltmeter
(b) rheostat
(c) wattmeter
(d) galvanometer
Ans: d

14. In a circuit a 33 Q resistor carries a current of 2 A. The voltage across the
resistor is
(a) 33 V
(b) 66 v
(c) 80 V
(d) 132 V
Ans: b

15. A light bulb draws 300 mA when the voltage across it is 240 V. The resistance of the light bulb is
(a) 400 Q
(b) 600 Q
(c) 800 Q
(d) 1000 Q
Ans: c

16. The resistance of a parallel circuit consisting of two branches is 12 ohms. If the resistance of one branch is 18 ohms, what is the resistance of the other ?
(a) 18 Q
(b) 36 Q
(c) 48 Q
(d) 64 Q
Ans: b

17. Four wires of same material, the same cross-sectional area and the same length when connected in parallel give a resistance of 0.25 Q. If the same four wires are connected is series the effective resistance will be
(a) 1 Q
(b) 2 Q
(c) 3 Q
(d) 4 Q
Ans: d

18. 1 angstrom is equal to
(a) 10-8 mm
(6) 10"6 cm
(c) 10"10 m
(d) 10~14 m
Ans: c

19. Current velocity through a copper conductor is
(a) the same as propagation velocity of electric energy
(b) independent of current strength
(c) of the order of a few ^.s/m
(d) nearly 3 x 108 m/s
Ans: c

20. Which of the following material has nearly zero temperature co-efficient of resistance?
(a) Manganin
(b) Porcelain
(c) Carbon
(d) Copper
Ans: a

21. You have to replace 1500 Q resistor in radio. You have no 1500 Q resistor but have several 1000 Q ones which you would connect
(a) two in parallel
(b) two in parallel and one in series
(c) three in parallel
(d) three in series
Ans: b

22. Two resistors are said to be connected in series when
(a) same current passes in turn through both
(b) both carry the same value of current
(c) total current equals the sum of branch currents
(d) sum of IR drops equals the applied e.m.f.
Ans: a

23. Which of the following statement is true both for a series and a parallel D.C. circuit?
(a) Elements have individual currents
(b) Currents are additive
(c) Voltages are additive
(d) Power are additive
Ans: d

24. Which of the following materials has a negative temperature co-efficient of resistance?
(a) Copper
(b) Aluminum
(c) Carbon
(d) Brass
Ans: c

25. Ohm's law is not applicable to
(a) vacuum tubes
(b) carbon resistors
(c) high voltage circuits
(d) circuits with low current densities
Ans: a

26. Which is the best conductor of electricity ?
(a) Iron
(b) Silver
(c) Copper
(d) Carbon
Ans: b

27. For which of the following 'ampere second' could be the unit ?
(a) Reluctance    
(b) Charge
(c) Power
(d) Energy
Ans: b

28. All of the following are equivalent to watt except
(a) (amperes)  ohm
(b) joules/sec.
(c) amperes x volts
(d) amperes/volt
Ans: d

29. One newton meter is same as
(a) one watt
(b) one joule
(c) five joules
(d) one joule second
Ans: b

30. Which one of the following does not have negative temperature co-efficient ?
(a) Aluminium    
(b) Paper
(c) Rubber
(d) Mica
Ans: a

31. Conductance : mho ::
(a)  resistance : ohm
(b)  capacitance : henry
(c) inductance : farad
(d) lumen : steradian
Ans: a

32. Nichrome wire is an alloy of
(a) lead and zinc
(b) chromium and vanadium
(c) nickel and chromium
(d) copper and silver
Ans: c

33. The rating of a fuse wire is always expressed in
(a) ampere-hours
(b) ampere-volts
(c) kWh
(d) amperes
Ans: d

34. The minimum charge on an ion is
(a) equal to the atomic number of the atom
(b) equal to the charge of an electron
(c) equal to the charge of the number of electrons in an atom (#) zero
Ans: b

35. In a series circuit with unequal resistances
(a) the highest resistance has the most of the current through it
(b) the  lowest resistance has the highest voltage drop
(c) the  lowest resistance has the highest current
(d) the highest resistance has the highest voltage drop
Ans: d

36. The filament of an electric bulb is made of
(a) carbon
(b) aluminium
(c) tungsten
(d) nickel
Ans: c

37. A 3 Q resistor having 2 A current will dissipate the power of
(a) 2 watts
(b) 4 watts
(c) 6 watts
(d) 8 watts
Ans: c

38. Which of the following statement is true?
(a) A galvanometer with low resistance in parallel is a voltmeter
(b) A galvanometer with high resistance in parallel is a voltmeter
(c) A galvanometer with low resistance in series is an ammeter
(d)     A galvanometer with high resistance in series is an ammeter
Ans: c

39. The resistance of a few meters of wire conductor in closed electrical circuit is
(a) practically zero
(b) low
(c) high
(d) very high
Ans: a

40. If a parallel circuit is opened in the main line, the current
(a) increases in the branch of the lowest resistance
(b) increases in each branch
(c) is zero in all branches
(d) is zero in the highest resistive branch
Ans: c

41. If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes
(a) 0.4 ohm
(b) 0.6 ohm
(c) 0.8 ohm
(d) 1.0 ohm
Ans: a

42. Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open
(a) there will be heavy current in the main line
(b) rest of the two bulbs will not light
(c) all three bulbs will light
(d) the other two bulbs will light
Ans: d

43. The four bulbs of 40 W each are connected in series swift a battery across them, which of the following statement is true ?
(a) The current through each bulb in same
(b) The voltage across each bulb is not same
(c) The power dissipation in each bulb is not same
(d) None of the above
Ans: a

44. Two resistances Rl and Ri are connected in series across the voltage source where Rl>Ri. The largest drop will be across
(a) Rl
(b) Ri
(c) either Rl or Ri
(d) none of them
Ans: a

45. What will be energy used by the battery if the battery has to drive 6.28 x 1018 electrons with potential difference of 20 V across the terminal ?
(a) 5 joules
(b) 10 joules
(c) 15 joules
(d) 20 joules
Ans:

46. A closed switch has a resistance of
(a) zero
(b) about 50 ohms
(c) about 500 ohms
(d) infinity
Ans: a

47. If/, R and t are the current, resistance and time respectively, then according to Joule's law heat produced will be proportional to
(a) I2Rt
(b) I2Rf
(c) I2R2t
(d) I2R2t*
Ans: a

48. Heat in a conductor is produced on the passage of electric current due to
(a) reactance
(b) capacitance
(c) impedance
(d) resistance
Ans:

49. The insulation on a current carrying conductor is provided
(a)     to prevent leakage of current
(b)     to prevent shock
(c) both of above factors
(d) none of above factors
Ans: c

50. The thickness of insulation provided on the conductor depends on
(a) the magnitude of voltage on the conductor
(b) the magnitude of current flowing through it
(c) both (a) and (b)
(d) none of the above
Ans: a

51. Which of the following quantities remain the same in all parts of a series circuit ?
(a) Voltage
(b) Current
(c) Power
(d) Resistance
Ans: b

52. A thermistor has
(a) positive temperature coefficient
(b) negative temperature coefficient
(c) zero temperature coefficient
(d) variable temperature coefficient
Ans: c

53. In an electric kettle water boils in 10 m minutes. It is required to boil the boiler in 15 minutes, using same supply mains
(a) length of heating element should be decreased
(b) length of heating element should be increased
(c) length of heating element has no effect on heating if water
(d) none of the above
Ans: a

54. An electric filament bulb can be worked from
(a) D.C. supply only
(b) A.C. supply only
(c)     Battery supply only
(d)     All above
Ans: d

55. Resistance of a tungsten lamp as applied voltage increases
(a)     decreases
(b)     increases
(c) remains same
(d) none of the above
Ans: b

56. Electric current passing through the circuit produces
(a)     magnetic effect
(b)     luminous effect
(c)     thermal effect
(d)     chemical effect
(e) all above effects
Ans: c

57. Resistance of a material always decreases if
(a)     temperature of material is decreased
(6)     temperature of material is increased
(c) number of free electrons available become more
(d) none of the above is correct
Ans: c

58. If the efficiency of a machine is to be high, what should be low ?
(a)     Input power
(b)     Losses
(c) True component of power
(d) kWh consumed
(e) Ratio of output to input
Ans: b

59. When electric current passes through a metallic conductor, its temperature rises. This is due to
(a)     collisions between conduction electrons and atoms
(b) the release of conduction electrons from parent atoms
(c) mutual collisions between metal atoms
(d) mutual collisions between conducting electrons
Ans: a

60. Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as
(a) 4 : 25
(b) 25 : 4
(c) 2 : 5
(d) 5 : 2
Ans: c

61. A glass rod when rubbed with silk cloth is charged because
(a) it takes in proton
(b) its atoms are removed
(c) it gives away electrons
(d) it gives away positive charge
Ans: c

62. Whether circuit may be AC. or D.C. one, following is most effective in reducing the magnitude of the current.
(a) Reactor
(b) Capacitor
(c) Inductor
(d) Resistor
Ans: d

63. It becomes more difficult to remove
(a) any electron from the orbit
(6) first electron from the orbit
(c) second electron from the orbit
(d) third electron from the orbit
Ans: d

64. When one leg of parallel circuit is opened out the total current will
(a) reduce
(b) increase
(c) decrease
(d) become zero
Ans: c

65. In a lamp load when more than one lamp are switched on the total resistance of the load
(a)     increases
(b)     decreases
(c) remains same
(d) none of the above
Ans: b

66. Two lamps 100 W and 40 W are connected in series across 230 V (alternating).
 Which of the following statement is correct ?
(a)     100 W lamp will glow brighter
(b)     40 W lamp will glow brighter
(c) Both lamps will glow equally bright
(d) 40 W lamp will fuse
Ans: b

67. Resistance of 220 V, 100 W lamp will be
(a) 4.84 Q
(b) 48.4 Q
(c) 484 ft
(d) 4840 Q
Ans: c

68. In the case of direct current
(a) magnitude and direction of current remains constant
(b) magnitude and direction of current changes with time
(c) magnitude of current changes with time
(d) magnitude of current remains constant
Ans: a

69. When electric current passes through a bucket full of water, lot of bubbling is observed. This suggests that the type of supply is
(a)     A.C.
(b)     D.C.
(c) any of above two
(d) none of the above
Ans: b

70. Resistance of carbon filament lamp as the applied voltage increases.
(a)     increases
(b)     decreases
(c) remains same
(d) none of the above
Ans: b

71. Bulbs in street lighting are all connected in
(a) parallel
(b) series
(c) series-parallel
(d) end-to-end
Ans: a

72. For testing appliances, the wattage of test lamp should be
(a) very low
(b) low
(c) high
(d) any value
Ans: c

73. The number of electrons in the outer most orbit of carbon atom is
(a) 3
(b) 4
(c) 6
(d) 7
Ans: b

74. Sparking occurs when a load is switched off because the circuit has high
(a) resistance
(b) inductance
(c) capacitance    
(d) impedance
Ans: b

75. Copper wire of certain length and resistance is drawn out to three times its length without change in volume, the new resistance of wire becomes
(a) 1/9 times
(b) 3 times
(e) 9 times
(d) unchanged
Ans: c

76. The ratio of mass of proton to that of electron is nearly
(a) 1840
(b) 1840
(c) 30
(d) 4
Ans: a

77. Voltage dependent resistors are usually made from
(a) charcoal
(b) silicon carbide
(c) nichrome
(d) graphite
Ans: c

78. A substance whose molecules consist of dissimilar atoms is called
(a) semi-conductor
(b) super-conducto
(c) compound
(d) insulator
Ans: c

79. International ohm is defined in terms of the resistance of
(a) a column of mercury
(b) a cube of carbon
(c) a cube of copper
(d) the unit length of wire
Ans: a

80. Three identical resistors are first connected in parallel and then in series.
The resultant resistance of the first combination to the second will be
(a) 9 times
(b) 1/9 times
(c) 1/3 times
(d) 3 times
Ans: b

91. Which method can be used for absolute measurement of resistances ?
(a) Lorentz method
(b) Releigh method
(c) Ohm's law method
(d) Wheatstone bridge method
Ans: d

92. Three 6 ohm resistors are connected to form a triangle. What is the resistance between any two corners ?
(a) 3/2 Q
(b  6 Q
(c) 4 Q
(d) 8/3 Q
Ans: c

93. Ohm's law is not applicable to
(a) semi-conductors
(b) D.C. circuits
(c) small resistors
(d) high currents
Ans: a

94. Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be
(a) 160 ohms
(b) 80 ohms
(c) 20 ohms
(d) 10 ohms
Ans: d

95. A nichrome wire used as a heater coil has the resistance of 2 £2/m. For a heater of 1 kW at 200 V, the length of wire required will be
(a) 80 m
(b) 60 m
(c) 40 m
(d) 20 m
Ans: a

96. Temperature co-efficient of resistance is expressed in terms of
(a) ohms/°C
(b) mhos/ohm°C
(e) ohms/ohm°C  
(d) mhos/°C
Ans: c

97. Which of the following materials has the least resistivity ?
(a) Zinc
(b) Lead
(c) Mercury
(d) Copper
Ans:

98. When current flows through heater coil it glows but supply wiring does not glow because
(a) current through supply line flows at slower speed
(b) supply wiring is covered with insulation layer
(c) resistance of heater coil is more than the supply wires
(d) supply wires are made of superior material
Ans: c

99. The condition for the validity under Ohm's law is that
(a) resistance must be uniform
(b) current should be proportional to the size of the resistance
(c) resistance must be wire wound type
(d) temperature at positive end should be more than the temperature at negative end
Ans: a

100. The weight of an aluminium conductor as compared to a copper conductor of identical cross-section, for the same electrical resistance, is
(a) 50%
(b) 60%
(c) 100%
(d) 150%
Ans: a

Monday, 16 January 2017

Top Electrical Engineering MCQs, Questions & Answers


When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is
A. overheated
B. shorted
C. open
D. reversed
A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt-hours of energy does it consume?
A. 20.16 kWh
B. 201.6 kWh
C. 2.01 kWh
D. 8.4 kWh

A power supply produces a 0.6 W output with an input of 0.7 W. Its percentage of efficiency is
A. 8.57%
B. 42.85%
C. 4.28%
D. 85.7%
A given power supply is capable of providing 6 A for 3.5 h. Its ampere-hour rating is
A. 0.58 Ah
B. 2.1 Ah
C. 21 Ah
D. 58 Ah

A 15 V source is connected across a 12  resistor. How much energy is used in three minutes?
A. 938 Wh
B. 0.938 Wh
C. 56.25 Wh
D. 5.6 Wh